K7 Chain Spray with or without "O- or X-rings"

White chain spray
%1 pcs in stock
SKU
77009

Fully synthetic lubricating spray for motorcycle chains with or without O- or X-rings. Displaces water and gives a very good lubricating film. K7 is designed for racing applications but is also recommended for hinge lubrication of passenger cars (especially for those with light paint colors where you do not want the lubricant to be clearly visible). After application, K7 leaves an off-white lubricating film. Cleaning is recommended before applying K7.

Property
  • greater corrosion protection
  • stable lubricating film reduces wear
  • o-ring tested
  • temperature stable and water resistant
  • extremely effective adhesion
  • no chain clogging
  • excellent creep capability
  • additional valve with spray tube
Application
  • Shake well before use. Spray the cleaned chain sparingly and evenly on the inside. Wait at least 25 minutes or, even better, overnight for optimum effectiveness. An improved grip is achieved.
Note
  • Container is pressurised. Do not expose to sunlight and temperatures over 50°C. Do not force open or burn, even after use.
  • Do not spray on flames or burning objects. Keep away from ignition sources. Do not smoke. Ensure adequate ventilation to avoid combustible vapour/air mixtures.
  • Keep away from children. Ensure can is empty before disposal.
  • Technical data subject to change without notice. Please observe the vehicle or machine manufacturer's directions. Please refer to the safety data sheet for further information.
Application area
  • ideally suitable for chains on motorcycles, bicycles or drive chains of other power units

File(s)